Troy-bilt Two-Stage Snow Thrower Bedienungsanleitung PDF herunterladen (Seite 8)

Setting Up

Your Snow

Thrower

Figure 8

Figure 7

Drift Cutters (If Equipped)

Drift cutters should be used when operating the snow

thrower in heavy drift conditions.

• On models so equipped, drift cutters are assembled to

the auger housing inverted. See Figure 7.

• Remove the carriage bolts by unthreading the hex

nuts which secure them, and reinstall the drift cutters

facing forward before operating the snow thrower.

Refer to Figure 8.

• Secure to the auger housing with carriage bolts and

hex nuts previously removed. See Figure 9.

If your unit is not equipped with drift cutters, you may

contact Customer Support as instructed on page 2 for

information regarding price and availability.

Snow Thrower Model Drift Cutter Kit:

All models- OEM-390-679

WARNING

Never use your hands

to clean snow and

ice from the chute

assembly or auger

housing.

IMPORTANT

Under any circum-

stance do not exceed

manufacturer’s recom-

mended psi. Equal tire

pressure should be

maintained at all times.

Excessive pressure

when seating beads

may cause tire/rim

assembly to burst

with force sufficient to

cause serious injury.

Refer to sidewall of

tire for recommended

pressure.

Figure 9

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Troy-bilt Two-Stage Snow Thrower Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Troy-bilt Two-Stage Snow Thrower